PROGUARD® HARD SURFACE PROTECTION FILM RED 600MM X 100M
Proguard Hard Surface Protection Film is perfect for reducing clean up time at the end of a building, painting or DIY project. It is a 100% waterproof, high-quality self-adhesive film designed specifically for protecting hard surfaces such as vinyl, marble, tiles and cured timber floors. It is particularly popular with the decorating trade as it prevents damage to hard floors and surfaces from spillages and other debris. The low-tack adhesive backing ensures that the film stays securely in place, making it safer to use than traditional dust sheets and polythene.
The lightweight self-adhesive film rolls are forward wound (adhesive side is inner side) which makes the rolls perfect for application with our Proguard Film Applicator or by hand. As the adhesive is on the inside it is not exposed to collect dirt. The low tack adhesive backing sticks to most hard surfaces without any tape required and will stay securely in place once applied. After use, it can be peeled away without leaving any residue which can be a problem with poor quality films.
PFMF11E has the added benefit of being flame retardant and having a non-slip pattern on the surface.
Benefits:
-
Self-adhesive for easy application – no taping required.
-
Lightweight, easy-to-handle rolls.
-
High tear & puncture resistance.
-
100% waterproof.
-
Easy to cut with a knife.
-
Film is clear in colour.
-
Available in a range of widths and lengths.
Limitations:
-
Product may become slippery when wet. Mop up any spills immediately or replace where necessary.
-
This product is for application to hard surfaces, DO NOT use on carpets.
-
adhesion will be reduced on dusty surfaces. Vacuuming prior to use is recommended.
-
Proguard Hard Surface Protection Film should be removed after a maximum of 40 days.
-
Always check Proguard Hard Surface Film is stuck firmly before commencing work.
-
Do not use underfloor heating whilst product is applied
-
On delicate surfaces, we advise that you test on a small area first.
-
It is the users’ responsibility to determine suitability for use. If in doubt contact technical services for advice.
Application:
Ensure surfaces to which Proguard Hard Surface Protection Film is to be applied are clean sound, dust free and dry. Remove outer packaging from roll. Place roll on the floor facing the direction it is to be applied and unwind approx. 600mm of material. Ensure the roll is stuck by smoothing out by either hand or foot. Simply pull the roll towards you ensuring it goes in a straight line. Smooth out with hands or feet as it unwinds. A very effective way of laying Proguard Hard Surface Protection Film is to push the roll along with a soft broom/brush using the brush to smooth out and remove air bubbles as it unwinds.
Performance Data:
|
Temperature Resistance |
60°C 160hours |
|
Tensile Strength |
≥45 N/mm |
|
Adhesive |
Pressure Sensitive Acrylic Water Based |
|
Adhesive Strength |
370-430 g/50mm |
|
Backing |
PE(LDPE and LLDPE) film |
If your order is placed by 4 PM, the estimated delivery time is before 5pm of the next working day.
Orders placed after 4 PM on Friday or during the weekend will not be processed until Monday.
PLEASE NOTE: ALL MATTING PRODUCTS HAVE A CARRIAGE CHARGE OF £75 (+VAT).
For all non-matting product orders, we offer a range of special delivery options as follows:
|
Order Value |
NEXT DAY BEFORE 5PM |
NEXT DAY BEFORE NOON |
NEXT DAY BEFORE 10:30 AM |
SATURDAY |
| Up to £250 | £20 | £40 | £70 | £80 |
| Over £250 | FREE | £20 | £50 | £60 |
Please note all prices quoted above are ex. VAT and that the above delivery information applies to UK mainland only.
Some areas of Northern Scotland and Cornwall have a longer delivery time - please contact us to confirm.
Visit our Delivery page for more information.